Yaltan Lighting Company Limited
mary.lin@yaltan.com Web: www.yaltan.com
Add to Cart
Hospital UVA UVC LED 270nm UV Disinfectant Light
UV Disinfectant Light Appliction
UV disinfection lamp is more effective, no irritating odor after disinfection, applicable area of 40 square meters, easy storage, safe and convenient use. Such as Home, Loft, Office, Factory, School, Restaurant, Clinic, Hospital, Hotel, Basement, Mall, and others Big area places. Ozone also very useful for remove bad smell in bedroom, bathroom, parlor, carpet, urine, pet , closet, basement , Loft,chicken coop , duck house , Pet house , Farm .
UV Disinfectant Light Parameters
| Hospital UVA UVC LED 270nm UV Disinfectant Light | |
| Model | BFG-UVled06S |
| Color | Silver/black/pink optional |
| Parameters | UV3535 6V 3W |
| Chip wavelength | UVA:390-405nm UVC:270-280nm |
| Working wavelength | 270-280nm |
| Operating Voltage | DV 5V |
| Working current | 1A Max |
| Sterilization efficiency | 99.90% |
| charging method | Plug-i |
| USB cable length | 50cm |
| Charging interface | Micro USB interface |
| battery capacity | Lithium battery 1800 mAh |
| Sterilization time | 3-10 Second |
| Number of lamp beads | 6pcs (LED) |
| Product Size | 280*30*27mm |
| Product Net Weight | 103g |
| Product gross weight | 131g |
Application
Working Principle
1. Destroy the DNA structure of bacteria and other microorganisms, make them lose their ability to reproduce, and then kill bacteria and other microorganisms.
2. Ultraviolet UVC can kill most bacteria and other microorganisms in air and water in a few seconds.
Spectrum
How to use
1. Tap the function switch once, the power indicator stays on until the end of disinfection or long press the function switch;
2. Then each time you tap the function switch, the time cycle is switched between 15-30-60 minutes, and the corresponding indicator light flashes;
3. Two seconds after the disinfection time is selected, the buzzer will beep for 1-2 seconds, the red indicator light corresponding to the disinfection time will stay on, and after a delay of 15 seconds,
the control board will supply power to the disinfection lamp to start disinfection;
4. Before the disinfection is completed, the short beep counts down for 10 seconds, the control board output is powered off and the disinfection is over, all the indicators are off;
5. Each time you touch the function switch, whether it is a light touch or a long press, it will be accompanied by.